Makita CLX205AJ 10.8V 2-Piece Combo Kit CXT with 2x 2.0Ah Batteries in MakPac Stacking Case
Only 1 left
Description / Makita CLX205AJ
821549-5
Stacking cases with connecting clips, compatible with other makes of case systainer.
DC10WC
Charging status indicator.
Compact and lightweight design.
Multi-contact slide type terminal.
Wall mountable for charging.
HP332DZ
Slide type Li-ion battery.
Brushless motor.
Electric brake.
2 mechanical gears.
Variable speed control by trigger.
Forward/reverse rotation.
Compact overall length of 168mm.
Equipped with Battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current.
Ergonomic soft grip.
Keyless Chuck.
LED job light.
Belt clip.
TD111DZ
New impact mode (A-mode): helps to eliminate "screw cam-out" and "cross threading" by driving at low speed until the start of tightening.
Variable speed.
Electric brake.
Forward/reverse rotation.
LED job light.
Compact design with overall length of 135mm.
Brushless motor.
Ergonomic soft grip.
Two selectable Impact Modes (High/Low).
Belt clip.
Features / Specification
| 197394-3 | |
|---|---|
| Description: | Li-ion slide battery |
| Battery Ah: | 2.0 (with indicator) Ah |
| Battery Type: | Li-ion |
| Voltage: | 10.8 v |
| Battery ID: | BL1020B |
| 821549-5 | |
| Description: | Connector Case (Type 1) |
| Length: | 396 mm |
| Width: | 296 mm |
| Height: | 105 mm |
| DC10WC | |
| Battery Range: | - 10.8 v |
| Battery Type: | Li-ion Slide Battery |
| Pack Quantity: | 1 |
| HP332DZ | |
| Battery Type: | Lithium-ion |
| Body only machine: | Yes |
| Voltage: | 10.8 v |
| Capacity in Steel: | 10 mm |
| Capacity in Wood: | 28 mm |
| Chuck Capacity: | 0.8 – 10 mm |
| Capacity in Masonry: | 8 mm |
| Blows per Minute (Hi) - ipm: | 0 - 22,500 ipm |
| Blows per Minute (Lo) - ipm: | 0 - 6,750 ipm |
| Noise sound pressure: | 82 dB(A) |
| Noise sound power: | 93 dB(A) |
| Noise K factor: | 3 dB(A) |
| No Load Speed (Hi): | 0 - 1,500 rpm |
| No Load Speed (Lo): | 0 - 450 rpm |
| Max Torque S/H 21 / 35 Nm | |
| Torque Settings 20 + Drill | |
| Vibration K factor1.5 m/sec² | |
| Vibration - Impact drilling into concrete: | 12.5 m/sec² |
| Vibration - Drilling into metal: | 2.5 m/sec² |
| Net weight: | 1.3 kg |
| TD111DZ | |
| Battery Type: | Lithium-ion |
| Body only machine: | Yes |
| Voltage: | 10.8 v |
| Blows per Minute (Hi) - ipm: | 0 - 3900 ipm |
| Blows per Minute (Lo) - ipm: | 0 - 1600 ipm |
| Machine Screw: | M4-M8 |
| Drive shank Hex: | 1/4 " |
| Standard Bolt: | M5-M14 |
| High Tensile Bolt: | M5-M12 |
| Coarse thread (length): | 22 - 90 mm |
| Noise sound pressure: | 94 dB(A) |
| Noise sound power: | 105 dB(A) |
| Noise K factor: | 3 dB(A) |
| No Load Speed (Hi): | 0 - 3000 rpm |
| No Load Speed (Lo): | 0 - 1300 rpm |
| Max Torque: | 135 Nm |
| Vibration - Fastening Bolt: | 12.5 m/sec² |
| Vibration K factor: | 1.5 m/sec² |
| Net weight: | 1.1 kg |
Supplied With
- 2 X 10.8v - 2.0Ah Li-ion Batteries
- Charger
- Makpac stacking Carry case